Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Engine, Cooling and Exhaust > Engine > Timing Components > Timing Belt > Component Information > Service and Repair > Replacement, W/Mechanical Tensioner > Page 2074
Check there there is no visible leakage.
If there is leakage or no resistance when pushed in or if it cannot be pushed in the tensioner damping unit must be replaced.
Install the new timing belt
Install tensioner damping unit torque to 25 Nm (18 ft lbs).
Installing camshaft pulley and timing belt
The timing belt must be installed correctly to obtain the correct timing. Before tightening the screws between the camshaft and
Secure drive belt
Press hard or knock the belt twice in the direction of arrow (1) and twice in the direction of arrow (2) using a rubber mallet.
|[PREV PAGE] [NEXT PAGE]|