Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Brake Fluid, Replacement With Bleeding Unit [CCCC] > Page 1569

Page 3
background image

[CCCC11]

Removing bleeding unit

Remove:

- Bleeding unit connection from brake fluid reservoir.

[CCCC12]

Finishing work

- Depress brake pedal repeatedly until brake pistons return to normal position.
- Check brake fluid level and install reservoir cap. Clean up any brake fluid spillage with lukewarm water and car-wash shampoo.

[CCCC13]

Installing wheels

Make sure that brake disc and rim contact surfaces are clean.

- Grease hub center rim guide with anti-rust agent 116 1038-3.

Install:

- Wheel.
- Nuts hand tight. Then tighten them in a star pattern to 110 Nm (81.2 ft lb). It tightening with a nut wrench, use torque bracket 115 8147

Note!

Tightening nuts in a star pattern to a specified torque is important to prevent stresses arising in the brake disc.

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Brake Fluid, Replacement With Bleeding Unit [CCCC] > Page 1569

[PREV PAGE] [NEXT PAGE]