Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Brake Fluid, Replacement With Bleeding Unit [CCCC] > Page 1572

Page 3
background image

[DDDD10]

Finishing work

- Depress brake pedal repeatedly until brake pistons return to normal position.
- Check brake fluid level and install reservoir cap.

Clean off any brake fluid spillage with lukewarm water and car-wash shampoo.

[DDDD11]

Installing wheels

Make sure that brake disc and rim contact surfaces are clean.

- Grease hub center rim guide with anti-rust agent 116 1038-3.
- Re-fit wheel.
- Tighten nuts hand tight. Then tighten in a star pattern to 110 Nm. If tightening with a nut wrench, use torque bracket

Note!

Tightening nuts in a star pattern to a specified torque is important to prevent stresses arising in the brake disc.

Maintenance > Fluids > Brake Fluid > Component Information > Service and Repair > Brake Fluid, Replacement With Bleeding Unit [CCCC] > Page 1572

[PREV PAGE] [NEXT PAGE]