Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Fuel Tank Pressure Sensor > Component Information > Diagrams > Page 3352

Page 3
background image

Removing Front Bracket

-

Remove the entire mounting from the bracket by pulling it towards the right of the car.

-

Disconnect the hose between the EVAP canister shut-off valve and air cleaner (ACL) from the clamp on the fuel tank.

Hint:  Note position of hose in the clamp in case it opens. The hoses must be reinstalled in their original positions.

Installing New Fuel Tank Pressure Sensor

-

Remove the screw

-

Remove clamp

Note! The clamp will be reused.

-

Disconnect hose.

-

Remove cable harness.

-

Install the new pressure sensor, route cabling as before.

Removing Clamp:
-

Squeeze clamp with a pipe wrench. Hold in place.

-

Pry apart with a small screwdriver.

Installing Clamp:
-

Press in the clamp with a pipe wrench until it locks.

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Fuel Tank Pressure Sensor > Component Information > Diagrams > Page 3352

[PREV PAGE] [NEXT PAGE]