Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Technical Service Bulletins > O2 sensors - New routing of wiring > Page 3392

Page 3
background image

When replacing the heated O2sensor adapter wiring (A), which is included in the kit, should be installed between the existing cable harness and the
heated 02 sensor.

Form the adapter wiring (A) into a loop. Install a tie strap as illustrated.

Note! Ensure that the ends (B) of the adapter wiring protective sheath point downwards so that moisture does not gather in the protective sheath.

This illustration displays a late version of the heated 02 sensor cable bracket. (Early type bracket is shown in the next step.)

On AWD cars the cable for the front heated 02 sensor should be routed over the fresh air intake hose.

Note!  Ensure that the ends of the adapter wiring protective sheath point downwards so that moisture does not gather in the protective sheath.

This illustration displays an early version of the heated 02 sensor cable bracket.

Installing fresh air intake hose:

Turbocharged engines

Powertrain Management > Computers and Control Systems > Sensors and Switches - Computers and Control Systems > Oxygen Sensor > Component Information > Technical Service Bulletins > O2 sensors - New routing of wiring > Page 3392

[PREV PAGE] [NEXT PAGE]