Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Emission Control Systems > Evaporative Emissions System > Evaporative Emission Control Canister > Component Information > Description and Operation > Page 3556

Page 1
background image

Evaporative Emission Control Canister: Service and Repair

Removing EVAP canister

Remove:

-

connector/outlet, press in catch and pull

-

connector/inlet, press in catch and pull

-

outlet hose from EVAP canister bracket.

Removing EVAP canister shut-off valve air hose clamp:

-

squeeze clamp with a pipe wrench. Hold in place

-

pry apart with a small screwdriver.

-

air hose from EVAP canister shut-off valve

-

rubber mounting with EVAP canister shut-off valve from EVAP canister bracket

-

two front and rear screws.

Remove:

-

nut on bracket at fuel filter.

Remove:

-

EVAP canister with bracket

-

Slacken off screw in underside of bracket (Torx 25).

-

EVAP canister from bracket.

Installing EVAP canister

-

In reverse order of removal.

Tighten screws to 25 Nm (18.5 ft.lb) and nut to 20 Nm (14.8 ft.lb).

Ensure that the EVAP canister:

-

engages in the catch at the front

-

engages in its groove the bracket.

Note!  Use a new screw clip. Check that outlet/inlet connector catches engage.

Powertrain Management > Emission Control Systems > Evaporative Emissions System > Evaporative Emission Control Canister > Component Information > Description and Operation > Page 3556

[PREV PAGE] [NEXT PAGE]