Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Fuel Delivery and Air Induction > Fuel Rail > Component Information > Technical Service Bulletins > Fuel Rail - Recommended Replacement Method > Page 3702

Page 2
background image

-

injector connectors.

-

2 fuel lines clamps to prevent pipes bending, see illustration.

Note!

Carefully remove both retaining clamps for the fuel pipes to prevent fuel spillage when the fuel rail is removed.

Remove:

Note!

Ensure that the pipe surface is not damaged when removing the return hose.

-

pressure regulator vacuum hose.

(The above text listed under Remove:, applies only to cars with fuel return system).

-

fuel rail mounting screws.

Carefully work off fuel rail.

Disconnect the fuel rail from the fuel line by twisting it through 90° and carefully pulling if away from the fuel line.

Place paper under the connection to absorb any fuel leakage.

Note!

Do not pry out claw connection using a fool. Twist pipe according to the above text.

Replacing nozzles and pressure regulator

3

Model year - 1997.

See other manual: Injector valve, replacement Section 2 (23, 28). Procedures TA1-TA5, TB1-TB3. 

TP 2301201

Disconnecting injectors and pressure regulator

4

Model year 1997-.

Remove:

-

screws holding mounting rail to fuel rail.

Powertrain Management > Fuel Delivery and Air Induction > Fuel Rail > Component Information > Technical Service Bulletins > Fuel Rail - Recommended Replacement Method > Page 3702

[PREV PAGE] [NEXT PAGE]