Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Fuel Delivery and Air Induction > Throttle Body > Component Information > Adjustments > Page 3849

Page 3
background image

Adjustment Of Link
^

Slacken link locknut (A) sufficiently to permit link to be separated and to spring back easily to innermost position.

^

Mount link in position.

^

Check that throttle spindle is in contact with adjusting screw (B) and that pulley is seated against idling stop (C).

^

Tighten link locknut (A).

^

Rotate pulley to check that link seats against adjusting screw (B) before pulley seats against idling stop (C).

Check / Adjust Throttle Pulley And Cable 
^

Pulley should move easily without sticking. 

^

Lubricate with petroleum jelly if needed. 

^

Cable should be taut in idling position but must not affect pulley position. 

^

Pulley should seat against idling stop. 

^

Adjust cable as required.

^

Press Accelerator Pedal (AP) to floor and check that pulley seats against full-load stop.

Powertrain Management > Fuel Delivery and Air Induction > Throttle Body > Component Information > Adjustments > Page 3849

[PREV PAGE] [NEXT PAGE]