Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Fuel Delivery and Air Induction > Throttle Body > Component Information > Adjustments > Page 3851

Page 2
background image

NOTE:  The throttle position sensor is not adjustable.

-

Install a new gasket on the throttle body.

Installing Throttle Body

-

Install the new throttle body on the intake manifold. Tightening torque 7 Nm.

-

Connect connector to throttle position sensor.

Checking Link

-

Undo link locknut.

-

Pull back link as far as possible, release one end and check that the link springs back easily to innermost position.

Installing Link

-

Locate link.

-

Check that the throttle spindle is in contact with the adjustment screw and that the throttle pulley is in contact with the idling stop.

-

Tighten link locknut

-

Open and close throttle, check that the throttle spindle is in contact with the adjustment screw when the throttle is closed.

Powertrain Management > Fuel Delivery and Air Induction > Throttle Body > Component Information > Adjustments > Page 3851

[PREV PAGE] [NEXT PAGE]