Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Powertrain Management > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Temperature Sensor/Switch, A/T > Component Information > Specifications > Page 4122

Page 3
background image

-

Tighten to: 25 Nm.

8. Remove the cables pins from socket.

-

Push in locking device beneath socket and push out red lock lug slightly.

9. Installation:

-

Lift up cables between oil cooler hose and control system cover.

-

Reinstall splashguard under engine.

-

Route the cables under gear position sensor.

-

Take care not to damage the cables.

10. Reconnect cables to socket;

-

Pin 12: blue/red cable

-

Pin 13: blue/black cable

-

Check pins are correctly positioned in socket.

11. Reconnect connector halves.

-

Make sure rubber seal is in place.

Powertrain Management > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Temperature Sensor/Switch, A/T > Component Information > Specifications > Page 4122

[PREV PAGE] [NEXT PAGE]