Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Relays and Modules > Relays and Modules - Body and Frame > Power Seat Control Module > Component Information > Service and Repair > With Heated Seat > Page 66
Power Seat Control Module: Service and Repair
Control module, replace
CAUTION: Install the transport safety device for the SIPS Airbag.
Make a note of radio code if anti-theft coded radio is installed.
Battery negative lead.
Seat from car.
The two screws from the bracket.
Connector from the control module.
Check that the new control module has P/N 9174904 (for the left seat) or 9174905 (for the right seat).
SIPS airbag, removing the safety device
Remove the transport safety device from the sensor module and return it to its storage place on the inside of the control panel.
Programming the memory functions
The new control module must be programmed with the positions for memory functions 1, 2 and 3. Otherwise diagnostic trouble codes (DTCs)
|[PREV PAGE] [NEXT PAGE]|