Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Relays and Modules > Relays and Modules - Brakes and Traction Control > Electronic Brake Control Module > Component Information > Service and Repair > Control Module, Replacement [MMMM] > Page 129
Installing control module
Center the control module relative to the hydraulic unit valves before pushing them into place.
- Install control module and tighten bolts to 1.8 Nm (1.3 ft lb).
- Pump motor and control module connectors.
- Read out any DTCs which are posted in the control module and replace them.
Check that ABS warning light stops flashing.
- Test drive the car.
Check that no new DTCs are posted.
The ABS and EBD systems are not available while Volvo Diagnostics is activated. Take great care when test driving as there is a serious
|[PREV PAGE] [NEXT PAGE]|