Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Braking Sensor/Switch > Component Information > Diagrams > Page 596
Braking Sensor/Switch: Service and Repair
Replacing EBD pressure switch
Clean around EBD pressure sensor connection to master cylinder.
Removing EBD pressure sensor
Disconnect connector from EBD pressure sensor.
Protective cap from bleed nipple by LH front wheel.
Connect hose to drain bottle.
Open bleed nipple, depress brake pedal and hold it down or lock it in that position.
Close bleed nipple.
Remove EBD pressure sensor and plug connector so that no dirt enters the braking system.
Check EBD pressure sensor
|[PREV PAGE] [NEXT PAGE]|