Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 643

Page 4
background image

Position a crimping sleeve in the crimping tool 951 2649, in crimping slot "A" (This is easier on a workbench). 
Squeeze the crimping tool a little to secure the crimping sleeve in the tool.

Install crimping sleeve

Place both cable ends (same color) in the crimping sleeve in the crimping tool. Insert cables in crimping sleeve so that their insulation comes up to but
not into the crimping sleeve. Both cables should be inserted from the same direction (parallel).

Note:  Insert cables in the crimping tool on the side without text!

Press crimping sleeve tight.
Check by hand that crimping sleeve is secure.

Splice the cable pairs 

Sensors and Switches > Sensors and Switches - Brakes and Traction Control > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 643

[PREV PAGE] [NEXT PAGE]