Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 804

Page 5
background image

Check installation of sending unit with gauge as per illustration.

7

Route harness

Attach the string to the connector of the sending unit.

Carefully pull the harness over to the access hole for the fuel pump.

Ensure that the harness is moved back to the left side of vehicle.

Install sending unit connector and mount connectors to the bracket.

8

Installing removed parts

Install:
- Protective cap over sending unit If applicable.
- Torque screws for fuel tank straps 25 Nm (20 ft.lbs) if applicable.
- Cover plates for access holes.
- Harness bracket and connectors.
- Panels and carpeting over spare wheel.

Ensure proper operation of fuel gauge.

WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.

Operation No. 

Labor description

Time allowance

23903-2

Fuel sending unit replacment according  

0.5 hr

to SB 23-0046

Sensors and Switches > Sensors and Switches - Instrument Panel > Fuel Gauge Sender > Component Information > Technical Service Bulletins > Fuel Sending Unit - Installation > Page 804

[PREV PAGE] [NEXT PAGE]