Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Hazard Warning Switch > Component Information > Service and Repair

Page 1
background image

Hazard Warning Switch: Service and Repair

EB1 Removing:

NOTE:  The hazard warning signal flasher switch is located under the radio and is replaced in the same way as the other switches.

-

Ignition off.

-

Carefully insert a screwdriver or weatherstrip tool between the panel and the top of the rocker switch. Carefully pry outwards until the switch can
be gripped with the fingers. Pull out the switch.

CAUTION:  Put something between the screwdriver and the surrounding panel so as not to damage it.

-

Disconnect connector.

EB2 Installing

-

Connect connector. Check that the rocker switch works before installing it in the panel.

-

Reinstall rocker switch, press into place in panel.

-

Test switch function.

Sensors and Switches > Sensors and Switches - Lighting and Horns > Hazard Warning Switch > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]