Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Sensors and Switches > Sensors and Switches - Lighting and Horns > Turn Signal Switch > Component Information > Service and Repair

Page 1
background image

Turn Signal Switch: Service and Repair

EA1 Removing:

-

Position the steering wheel straight ahead. 

-

Ignition off.

Remove:
-

steering wheel cover screws.

-

steering wheel covers. Push the upper one to one side.

-

switch screws.

-

Disconnect connector. Replace switch.

EA2 Installing:

CAUTION:  The turn signal switch should be in the neutral position when it is installed. The pin that controls automatic cancel may otherwise be
broken off.

Install:
-

wiper and/or turn signal indicator switch. Ensure that the ground lead is positioned under the lower mounting screw when it is installed.

-

steering wheel covers and screws.

-

Test switch function.

Sensors and Switches > Sensors and Switches - Lighting and Horns > Turn Signal Switch > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]