Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 1319

Page 3
background image

6. Reinstall connector on kickdown switch

-

Reinstall locking clip on cable tensioner

-

Make sure cable is positioned correctly in the engine compartment.

-

Firmly latch cable onto throttle control pulley

-

Insert a 3.5 mm (0.14 inch) spacer between the throttle pulley idle stop and the bracket stop.

-

Make sure locking clip is positioned firmly against bracket. 

Adjust cable until it is under light tension.

7. Remove spacer Remove locking clip and replace cable tensioner in bracket with locking clip

-

Reinstall cover

8. Checking DTCs

-

Using a suitable scan tool, check that DTCs have been cleared.

Sensors and Switches > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 1319

[PREV PAGE] [NEXT PAGE]