Volvo Workshop Manuals
V70 GL L5-2.4L VIN 55 B5254S (1998)
Transmission and Drivetrain > Automatic Transmission/Transaxle > Accumulator, A/T > Component Information > Service and Repair > Accumulator Pistons/Seals-B2/C2 > Page 4234
8. Accumulator piston and valve spring specifications
Refer to the table above.
NOTE: Also refer to step 4
9. Replace accumulator piston seals
Lubricate seals with ATF oil.
Take care to ensure that seal ends are not damaged!
10. Reinstall accumulator pistons and springs.
Reinstall valves and springs.
Reinstall cover plate and gasket.
Tighten 6 screws to: 6.5 Nm.
CAUTION: Excessive torque may impose stress on system, causing valves to stick.
Reinstall control system.
Refer to steps 22 through 38 of Open The Control System. See: Valve Body/Service and Repair
|[PREV PAGE] [NEXT PAGE]|