Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4187

Page 4
background image

11. On right-hand drive models:

-

Lower sub-frame approx. 100 mm (4 inch).

-

Ensure that steering gear studs (five) and crash guard plate studs are clear of frame.

-

Remove bolts in anti-roll bar bearing cap on left-hand side. 

-

Slacken bolts on right-hand side until held by just a few threads.

12. Lower sub-frame.

NOTE: Ensure that steering gear and guard plate are separated from frame.

-

Lower sub-frame to expose control system housing.

13. Removal:

-

Place container underneath transmission.

-

Remove oil pipe.

-

Undo clip securing oil temperature sensor cable, at point where cable is folded.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4187

[PREV PAGE] [NEXT PAGE]