Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4201

Page 4
background image

8. Install:

-

Retainer to cable harness grommet.

-

Gear position sensor bracket screw.

-

Selector lever.

Tighten to: 16 Nm.

-

Gear selector cable with washer and retaining clip.

Apply grease part No. 1161241-3, or equivalent, sparingly to lever arm pin.

9. Reinstallation of connector.

-

Reinstall sockets to connector.

-

Reconnect connector halves.

-

Ensure that rubber sleeve is in position.

-

Secure harness and rubber sleeve with cable ties.

-

Reinstall connector on transmission.

-

Reconnect connector.

-

Remember rubber seal.

10. Finishing work

-

Install control system.

Refer to steps 22 through 38 of Open The Control System. See: Valve Body/Service and Repair

Transmission and Drivetrain > Automatic Transmission/Transaxle > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4201

[PREV PAGE] [NEXT PAGE]