Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Case, A/T > Component Information > Technical Service Bulletins > Rear Transmission Cover - Inspect Before Replacement > Page 4251

Page 14
background image

Remove the two special tools 999 5517.

Install the new M14 bolts and the rear support plate. Install the two support plate bolts loosely.

Torque subframe bolts (four) to 105 Nm (77.5 lbs) + 120.

Torque bolts for the support plate to 50 Nm (37 lbs)

Installing universal joint to steering gear

AB B20

Note!

Make sure the markings on the U-joint and the pinon shaft correspond.

Install universal joint to steering gear. Tighten to 20 Nm (15 lbs).

Lock spring.

Installing attachment bolt

AB B21

Re-tighten the clamp for the exhaust pipe behind the catalytic converter.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Case, A/T > Component Information > Technical Service Bulletins > Rear Transmission Cover - Inspect Before Replacement > Page 4251

[PREV PAGE] [NEXT PAGE]