Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4338

Page 2
background image

3. Adjustment

-

Remove:

Dipstick pipe bracket.
Gear position sensor screws

-

Rotate the gear position sensor so that the mark on the switch aligns with the indentation on the tool.

-

Tighten sensor screws to: 25 Nm

4. Reinstall bracket for dipstick pipe.

-

Make sure that the O-ring on the pipe is in place.

-

Tighten to: 25 Nm.

-

Install:

Rod arm on control shaft, then tighten to: 16 Nm.
Transmission cable on rod arm with washer and lock clips.
Apply grease part No. 1161241-3, or equivalent, sparingly to the rod arm pin.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4338

[PREV PAGE] [NEXT PAGE]