Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4342

Page 3
background image

-

Reinstall upper connector section.

-

Remember rubber gasket.

REINSTALLATION AND ADJUSTMENT OF GEAR POSITION SENSOR

6. Reinstallation

-

Reinstall gear position sensor.

-

Tighten sensor screws lightly.

-

Reinstall rubber washer, lock washer and nut on control shaft connector.

-

Tighten nut.

-

Lock nut with lock washer.

7. Adjustment

-

Adjust gear position sensor refer to Adjustments steps 2 and 3. See: Adjustments

8. Reinstallation, continue:

-

Dipstick pipe bracket.

Make sure that the O-ring on the pipe is in place.
Tighten to: 25 Nm.

-

Rod arm on control shaft.

Tighten to: 16 Nm.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4342

[PREV PAGE] [NEXT PAGE]