Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Selector Shaft, A/T > Component Information > Service and Repair > Page 4415

Page 2
background image

3. Replacement of control shaft seal ring.

-

Use a small, rounded screwdriver to remove the old seal ring. 

Take care not to damage shaft.

-

Reinstall a new seal ring.

Apply ATF to the ring.
Use tool No. 999 5476, or equivalent to tap the new ring into place. 

INSTALLATION

Reinstallation And Adjustment Of Gear Position Sensor

4. Reinstallation

-

Reinstall gear position sensor.

-

Tighten sensor screws lightly.

-

Reinstall rubber washer, lock washer and nut on control shaft connector.

-

Tighten nut.

-

Lock nut with lock washer.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Linkage, A/T > Selector Shaft, A/T > Component Information > Service and Repair > Page 4415

[PREV PAGE] [NEXT PAGE]