V70 GL L5-2.4L VIN 55 B5254S (1998)
8. On right-hand drive models:
-
Remove:
Steering gear crash guard
Crash guard/sub-frame nut
9. Remove:
-
Remove link/ball joint from wheel spindle (left side).
-
Pull down link to expose ball joint. Install protective sleeve 999 5562 on ball joint.
-
If the ball joint is difficult to insert in the wheel spindle tap a chisel in the groove on the spindle.
-
Disconnect links from anti-roll bar on each side.
-
Remove sub-frame support plate bolts on each side.
10. Removal of sub-frame
-
Remove sub-frame from car.
-
Position hoist tool No. 998 5972, or equivalent, under sub-frame on left-hand side and raise sufficiently to support frame.
-
Unscrew bolts (two) between frame and body on righthand side by 1-15 mm (0.4"-0.6 inch).
-
Remove bolts on left-hand side.