Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4516

Page 8
background image

21. Replacing solenoid

-

Remove solenoid retaining screws

-

The illustration shows solenoids SL, S1 and cable harness, early version.

-

Remove solenoids from control system.

-

Install new solenoids.

-

Lubricate solenoid O-rings (S1, S2, SL) with a little Vaseline. 

Install solenoids and tighten screws to: 10 Nm

22. Reinstallation of control system

-

Reinstall gear selector slide in control system as illustrated. 

-

Install new seals in transmission.

Use Vaseline to hold seals in position.

23. Install control system in transmission.

-

Insert arm on gear selector slide in hole in gear selector cam.

-

Install screws.

Note that screws are of different lengths (measured in mm. see illustration).

NOTE:
-

Tighten screws alternately.

-

Tighten to: 10 Nm

-

Install cover with new gasket.

Tighten to: 10 Nm

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4516

[PREV PAGE] [NEXT PAGE]