Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4518

Page 10
background image

26. Reinstallation of oil cover

-

Reinstall control system cover on transmission.

Tighten screws (Torx TX40) diagonally to: 12 Nm
Stretch cable up to oil temperature sensor.
Ensure that cable is correctly positioned.

Fold cable on top of transmission and secure with clamp. 

Install oil pipe.

27. On right-hand drive models:

-

Raise sub-frame to approx. 100 mm (4 inch) from the body.

-

Position steering gear and guard plate in sub-frame.

-

Install anti-roll bar bolts on left-hand side and tighten both bearing caps to: 50 Nm

28. Reinstallation of sub-frame

-

Reinstall sub-frame.

-

Use new bolts (4 x 14 mm).

Lubricate bolt threads.

-

Commence on left-hand side.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4518

[PREV PAGE] [NEXT PAGE]