Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4706

Page 2
background image

4. Remove:

-

Tunnel console.

Undo connectors (the car in the picture has two).

-

Screws at the front and the back of the tunnel console.

-

The tunnel console.

5. Remove the selector cable lead-through from the firewall.

-

Remove panel and fold back carpet to gain access to cable lead-through in the firewall.

-

Undo the two bolts holding the lead-through and undo the lead-through from the bolts in the bodywork.

-

Remove the screw holding the console to the tunnel (earlier models).

-

Pull air duct apart.

6. Remove the shift lever and four screws.

NOTE:  Remove the cross member side reinforcement members.

7. Disconnect selector cable socket joint from shift lever linkage.

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4706

[PREV PAGE] [NEXT PAGE]