Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4708

Page 4
background image

Tighten four shift lever bolts to 25 Nm. 

-

Tighten cross-member bolts to 25 Nm.

12. Install:

-

Bolt to tunnel console (earlier models).

-

Connect air duct.

-

Two lead-through nuts.

-

Panel and put carpet back in place.

13. Install:

-

Tunnel console via screws at front and back of console.

-

Connect connectors (the car in the picture has two).

14. Install:

-

Cigarette lighter panel/storage compartment via the two screws at the back.

-

Some models: fit DLC to panel.

-

Cover under parking brake lever.

-

Storage compartment lid.

-

Shift lever bellows (gaiter) to tunnel console.

Do up the front fasteners first, then the rear ones.

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4708

[PREV PAGE] [NEXT PAGE]