Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4710

Page 1
background image

Shift Cable: Service and Repair
Selector Cable Bushings and Dampers

1. Remove Air Cleaner (ACL).

Turbo models only: 
Disconnect timing valve from ACL.

2. Remove clips and washers from levers 

Press the old bushings out of the ring terminals.
Only If replacing damper units on cable bracket:
Remove clips from cable bracket and remove bracket assembly from transmission.

3. Install the new bushings in the ring terminals.

NOTE:  Make sure bushings/openings are positioned as illustrated.    

Transmission and Drivetrain > Manual Transmission/Transaxle > Shift Linkage, M/T > Shift Cable, M/T > Component Information > Service and Repair > Selector Cables > Page 4710

[PREV PAGE] [NEXT PAGE]