Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4741

Page 2
background image

DISASSEMBLING AND REASSEMBLING OF CONNECTOR

3. Disassembling

-

Separate the connector on transmission.

-

Disassemble connector. Remember rubber gasket.

-

Disconnect cable clamps and detach connector from transmission.

-

Remove sockets from connector casing.

-

Remove rubber seal from connector.

-

Insert screwdriver between casing and socket and press catch in.

At the same time slide the sockets out of the casing.

4. Detach socket for gear position sensor (8-pin) from other sockets.

-

Remove gear position sensor.

5. Reassembling

-

Reassemble position sensor socket with the other sockets. 

-

Reinstall sockets in casing and put rubber seal back in place. 

-

Reinstall connector on transmission.

-

Reinstall cable clamps around cable harness and rubber seal. 

Transmission and Drivetrain > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Transmission Position Switch/Sensor, A/T > Component Information > Adjustments > Page 4741

[PREV PAGE] [NEXT PAGE]