Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4788

Page 2
background image

4. Install:

-

Support rails tool No. 999 5033, or equivalent, on fender edges.

-

Lifting frame tool No. 999 5006, or equivalent, on support.

-

Lifting hook tool No. 999 5460, or equivalent, in torque rod bracket.

Pull on hook to relieve load on engine mountings.

5. Remove:

-

Left front wheel.

-

Front splashguard.

Remove both bolts and press splashguard forward sufficiently to release guide spigot at rear edge.
Free splashguard at front edge.

-

Splashguard under engine. (Early type).

-

Unbolt EVAP canister holder from sub-frame

Cut tie securing hoses and hang canister on body.
Unhook hose from sub-frame.

6. Oil, drain

-

Drain transmission oil.

Reinstall plug with new seal
Tighten to: 40 Nm.

WARNING: Oil may be extremely hot.

7. Remove:

-

Steering gear nuts oil pipe bracket screw

-

Bolt securing front engine mounting to sub-frame

-

Bolts securing torque rod support on transmission 

-

Screw securing cable conduit to front member of sub-frame.

Unhook conduit from frame.

Transmission and Drivetrain > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4788

[PREV PAGE] [NEXT PAGE]