Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4791

Page 5
background image

-

Pull out cable and place to one side.

14. Removal:

-

Remove control system cover screws (Torx TX40)

-

Clean sealing compound residue from threads (8 x 1.25 mm).

-

Remove cover.

-

Use separator tool No. 999 5477, or equivalent.

Tap tool carefully into joint between cover and transmission to ensure that cover sealing flange is not distorted.
Take care to ensure that oil temperature sensor cables are not damaged.

-

Remove remains of gasket from cover and transmission joint faces

Use scraper.

NOTE:
-

Ensure that no debris enter transmission.

-

Wash cover thoroughly.

15. Preparation

-

Remove:

Solenoid valve connectors.
Unclip wiring harness from clips on control system.

NOTE:
-

Solenoid S1 and solenoid S2 have two types of cable harness

-

See the following operations.

16. Information, performance and combinations

Transmission and Drivetrain > Transmission Control Systems > Actuators and Solenoids - Transmission and Drivetrain > Actuators and Solenoids - A/T > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4791

[PREV PAGE] [NEXT PAGE]