Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 GL L5-2.4L VIN 55 B5254S (1998)

Transmission and Drivetrain > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 4833

Page 2
background image

3. Removal

-

Detach throttle cable from Accelerator Pedal (AP)

-

Free the latch lugs that hold the kickdown switch in place by pushing a screwdriver into the opening in cowl-panel.

Push out switch with throttle cable.

-

From the engine compartment side, make sure no remnants of the latch lugs remain between the insulation and cowl-panel.

4. Reinstallation

-

Installation of new throttle cable/kickdown switch

-

Ensure that connector is correctly positioned upright.

-

Make sure latch lugs engage cowl-panel.

5. Reattach throttle cable to AP

-

Make sure rubber cushion is in place in the hole on AP.

-

Use retainer in AP to fasten cable.

Make sure bead on the end of cable is anchored at the bottom of the retainer.

-

Cars with SRS:

Replace knee bolster, tighten to: 20 Nm.
Reinstall sound insulation pad

Transmission and Drivetrain > Transmission Control Systems > Sensors and Switches - Transmission and Drivetrain > Sensors and Switches - A/T > Downshift Switch, A/T > Component Information > Service and Repair > Page 4833

[PREV PAGE] [NEXT PAGE]