volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 3
background image

- Run a lead down through hole for level sensor and fuel pump to rear axle.
- Attach new connector to lead.

Note!

Protect connector from dirt and moisture.

- Pull connector up alongside fuel hoses to the other connector.
- Connect connector to wheel sensors. Install leads to opening.

[LLLLA6]

Finishing

- Replace covers on fuel pump and level sensor. Check that seals are intact.
- Lay mats back.

[LLLLA7]

Operational checks

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Wheel Speed Sensor > Component Information > Service and Repair > Front Wheel Sensor [KKKK] > Page 5486

< PREV PAGE NEXT PAGE >