Volvo Workshop Manuals
V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With VVT > Page 2091
Install the center screw which secures the variable Valve Timing (VVT) unit to the camshaft. Do not tighten yet!
Check that the timing gear pulley is still in the limit position in the oval holes.
Install the timing gear pulley on the intake camshaft with two screws, but do not tighten.
Installing the timing belt
Tighten the center screw on the camshaft belt tensioner to 5 Nm (4 ft lbs).
Hold the variable Valve Timing (VVT) unit secure at the clockwise limit position when the belt is being installed.
|[PREV PAGE] [NEXT PAGE]|