Volvo Workshop Manuals
V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Engine, Cooling and Exhaust > Engine > Seals and Gaskets, Engine > Camshaft Oil Seal > Component Information > Service and Repair > With VVT > Page 2098
Remove blind cover plug and install gauge 999 5451 for the crankshaft, turn the crankshaft counter-clockwise until it stops against the drift.
camshaft pulleys, with two screws so that they precisely act on the pulleys
tensioner damping unit
Check that the camshaft screw holes are centered, see illustration.
Adjusting the mechanical belt adjuster
If a mechanical belt adjuster is being used, adjust accoreding to Adjusting the Mechanical Belt Adjuster See: Timing Components/Timing Belt
Tighten timing belt
Remove the lock pin from the tensioner damping unit.
|[PREV PAGE] [NEXT PAGE]|