V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Drill out the hole factory marked on the filter holder using a 3 mm (1/8") diameter drill.
Screw the retaining bracket P/N 684932-4 into place with the screw P/N 979186-4 and washer P/N 960138-6.
1Note: The bracket, screw and washer is not included in the Pollen filter kit.
Replace the existing air intake with the filter holder
For cars with Climate Control (ECC) M/Y 1993 and 1994 partly, chassis number lower than 854: 131217, 955: 037306
Push the sensor into bracket
Use a tie strip P/N 948211-8 to damp the cables to the bracket