V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Hose/Line HVAC: Service and Repair
Replacing Receiver/Drier or Suction Line
Special tools: 999 5474, 999 5472
TTTN1 Before starting work on the Receiver/Drier or suction line
WARNING! FOLLOW THE SAFETY PRECAUTIONS FOR WORK ON A/C SYSTEMS ACCORDING TO AC. SAFETY INSTRUCTIONS
WHEN HANDLING REFRIGERANT See: Heating and Air Conditioning/Service Precautions/Technician Safety Information
NOTE! Read the sections covering slow and quick leaks first, according to BG1. See: Heating and Air Conditioning/Service and Repair
NOTE! When replacing the Receiver/Drier always install new O rings in pipes and quick-release connectors. Always plug pipes and couplings when
working on the climate control system.
Removing Receiver/Drier or suction line
First read TTTN1.
Disconnect battery negative lead.
Drain system of refrigerant according to BD and BF1. (See B above)
Remove fresh air intake to control module box.
Detach engine cooling fan (FC) relay and engine cooling fan (FC) motor cable from fan shroud.
Detach fan shroud.
Remove relay shelf and spacer washers.
Disconnect the engine cooling fan (FC) connector.
Disconnect the engine cooling fan (FC) motor connector.