V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Central Electronics Box: Service and Repair
Replacing Control Module Connector
GD1 Removing the Rubber Mat:
NOTE: Disassemble control module box according to GC1 - GC5. See: Replacing Control Module Box
Remove silicon rubber mat from holder.
Take apart the holder and told it to release the catch.
GD2 Disconnecting Connector:
Turn the holders and press together the control module connector pawls.
Pull the connector out of the holder.
GD3 Removing Terminal Pins:
Mark the position of the terminal pins in the connector.
Remove the terminal pins, use an instrument screw- driver to release the catches.