volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Oil Separator: Service and Repair

OIL TRAP SEAL REPLACEMENT

Remove Intake Manifold
^

Remove the intake manifold.

Remove:
^

Hose from oil trap.

^

Intake manifold bracket.

^

Two oil trap screws.

^

Oil trap.

^

Check that oil trap seal surfaces are clean.

Install Oil Trap
^

Connect two oil trap hoses to engine block connecting sleeve.

^

Install upper hose with a new hose clamp and tighten lower hose.

^

Install and tighten screws to 20 Nm (14.8 ft lb)

^

Install intake manifold bracket, finger tighten lower screw.

Powertrain Management > Emission Control Systems > Positive Crankcase Ventilation > Oil Separator > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >