V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Dipstick pipe bracket.
Gear position sensor screws
Rotate the gear position sensor so that the mark on the switch aligns with the indentation on the tool.
Tighten sensor screws to: 25 Nm
4. Reinstall bracket for dipstick pipe.
Make sure that the O-ring on the pipe is in place.
Tighten to: 25 Nm..
Rod arm on control shaft, then tighten to: 16 Nm.
Transmission cable on rod arm with washer and lock clips.
Apply grease part No. 1161241-3, or equivalent, sparingly to the rod arm pin.