O2 sensors - New routing of wiring (Oxygen Sensor) (page 2 of 4)

Make

Volvo

Model

V70 XC AWD

Engine

L5-2.4L Turbo VIN 56 B5254T

Year

1998

Section

Sensors and Switches - Computers and Control Systems › Oxygen Sensor › Technical Service Bulletins

Sensors and SwitchesO2 sensors - New routing of wiring · page 2 of 4

Heated 02 sensor, mounting

Preparation

Turbocharged engines

Remove:

-

Fresh air intake hose between air cleaner (ACL) housing and turbocharger (TC).

Naturally aspirated engines

Remove:

-

the preheating hose.

Removing/installing heated 02 sensor

Remove the front heated O2sensor. Use tool no. 9995543

Install a new heated 02 sensor.

Note!  AWD. Replace front 02 sensor from the engine compartment.

Installing adapter wiring

Note!  The illustrations only illustrate one of the adapter wiring systems, but the same method applies to both front and rear 02 sensor.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

02 Diagnostics

The same page in: V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998), V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998), V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998), V70 AWD L5-2.4L Turbo VIN 56 B5254T (1998), V70 GLT L5-2.4L Turbo VIN 56 B5254T (1998), V70 GLT L5-2.4L Turbo VIN 56 B5254T (1998), V70 GLT L5-2.4L Turbo VIN 56 B5254T (1998), V70 GLT L5-2.4L Turbo VIN 56 B5254T (1998), V70 GL L5-2.4L VIN 55 B5254S (1998), V70 GL L5-2.4L VIN 55 B5254S (1998), V70 GL L5-2.4L VIN 55 B5254S (1998), V70 GL L5-2.4L VIN 55 B5254S (1998), V70 L5-2.4L VIN 55 B5254S (1998).