volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 12
background image

31. On right-hand drive models: 

-

Install steering gear guard plate.

Tighten the two bolts to: 80 Nm

32. Install:

-

EVAP canister holder and hose on sub-frame.

Clip all hoses to frame with a band clamp.

-

Splash-guard under engine. (Early type)

-

The front cover.

Press into position at front.
Press forward and press upward at rear so that guide spigot is seated in slot.
Install screws.

33. Reinstallation of link/ball joint to wheel spindle

-

Remove protective sleeve.

NOTE:  Take care that the ball joint boot is not damaged.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Shift Solenoid, A/T > Component Information > Service and Repair > Shift Solenoid Inspection/Replacement > Page 4724

< PREV PAGE NEXT PAGE >