volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 9
background image

24. Connection of wiring harness

-

Connect wiring harness connectors to solenoids.

-

The illustration shows solenoids SL, S1 and cable harness, early version

Refer to illustrations for steps 16 through 18 for late version.

-

Wiring color codes:

Solenoid S1 white
Solenoid S2 black
Solenoid STH blue/brown
Solenoid SL red

-

Reinstall cable harness and check that harness is correctly positioned.

25. Assembling of control system

-

Tightening of cover

Check that cover mating surface is level.
Wipe cleaned joint faces on cover and transmission with methylated spirits.

NOTE:  Ensure that no dirt enters the transmission.

Place approx. 3 mm (0.12 inch) thick bead of sealing compound part No. 11611409-6, or equivalent, on cover.
Also coat face around screw holes.

Transmission and Drivetrain > Automatic Transmission/Transaxle > Valve Body, A/T > Component Information > Service and Repair > Open The Control System > Page 4839

< PREV PAGE NEXT PAGE >