Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)

Transmission and Drivetrain > Differential Assembly > Viscous Coupling, Differential > Component Information > Technical Service Bulletins > Customer Interest for Viscous Coupling: > 4460004 > Feb > 00 > Viscous Coupling - Rotating Sound > Page 4965

Page 2
background image

TOOLS

ROTATING SOUND FROM VISCOUS COUPLING HOUSING/VISCOUS COUPLING

1

Replacing the bearing, cleaning and bonding

To replace the bearing, see VADIS: Section 4, Removing, replacing and installing, 43 Gearbox,

Clean the mating surface of the bearing (viscous coupling housing side). Clean the corresponding surface in the viscous coupling housing. Clean the
surfaces before pressing the new bearing into the viscous coupling housing Use Cleaner H, P/N 1161436-9.

Apply metal adhesive P/N 1161370 to the mating surface of the bearing (viscous coupling housing side) and to the corresponding surface in the viscous
coupling housing.

Caution!  Allow 6 hours for the metal adhesive to cure properly and to reach maximum strength before delivering vehicle to customer

WARRANTY STATEMENT: Claims may be submitted under the New Car Warranty when there is a documented customer complaint, using claim type
01.

Transmission and Drivetrain > Differential Assembly > Viscous Coupling, Differential > Component Information > Technical Service Bulletins > Customer Interest for Viscous Coupling: > 4460004 > Feb > 00 > Viscous Coupling - Rotating Sound > Page 4965

[PREV PAGE] [NEXT PAGE]