volvo Workshop Repair Guides

Volvo Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 15
background image

Installing Torque Tube 

-

Install torque tube. Lightly tighten the four screws crosswise, then tighten to 50 Nm (37 ft.lb.)

NOTE:  Check that the mating faces on the final drive housing and torque tube are clean and that the washer is in place on the viscous coupling
shaft.

Transmission and Drivetrain > Differential Assembly > Viscous Coupling, Differential > Component Information > Technical Service Bulletins > Page 4998

< PREV PAGE NEXT PAGE >