Volvo Workshop Manuals
V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)
Transmission and Drivetrain > Drive/Propeller Shafts, Bearings and Joints > Drive/Propeller Shaft > Component Information > Technical Service Bulletins > Drivetrain - Revised Driveshaft Removal/Installation > Page 5057
There is a protrusion inside the joint that can damage the rubber boot if the propeller shaft is bent to its maximum when loosening an end or removing
If the entire propeller shaft is to be removed, the rubber boot must be protected.
Cut a 35 mm (1 3/8") piece of discarded coolant hose or similar. Cut the hose to length. Insert the hose in the joint and secure it with a cable
|[PREV PAGE] [NEXT PAGE]|