Workshop Repair Manuals

Volvo Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volvo Workshop Repair Guides


V70 XC AWD L5-2.4L Turbo VIN 56 B5254T (1998)

Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Constant Velocity Joint > Component Information > Service and Repair > Front > Page 5026

Page 3
background image

10. Press joint onto drive (axle) shaft Use drift 2731 and universal puller as counterhold.

Install new circlip.

11. Remove protective paper from new gasket. Locate gasket in recess in joint

12. Pack joint and outer cover with grease

Use grease supplied with kit.

13. Press home cover
14. Press new grease into joint and bellows
15. Coat inner cover with sealing agent. Press home cover.
16. Place gaiter in position on cover and on drive (axle) shaft.

17. Install clips and tighten with pincers.

Transmission and Drivetrain > Drive Axles, Bearings and Joints > Axle Shaft Assembly > Constant Velocity Joint > Component Information > Service and Repair > Front > Page 5026

[PREV PAGE] [NEXT PAGE]